JENTEX

Application / Operation

Extremely universal, high-quality folder for bed sheets, quilt covers, curtains, table linen and blankets.

Capacity / Speed

  • Standard working width 3150 mm/125" and maximum length of products to be folded is 600 mm/23½"
  • Max. working width of the crossfolder is 600 mm/23½"
  • Max. working speed: 36 m/min. / 118 ft./min.
  • Cycle time: 5 sec. for a feeding length of 1660 mm/66"

Models

The Jentex folder is designed as an all-in-one folder.

The Jentex has the new crossfolder system with a roll-off conveyor delivering the linen to the first crossfold station.

The following models are available:

  • JENTEX 3 x 3
  • JENTEX 3 x 4
  • JENTEX 4 x 3
  • JENTEX 4 x 4
  • JENTEX 4 x 5
  • JENTEX 5 x 4
  • JENTEX 5 x 5

Other combinations are available upon request.

Features

  • PLC control system CT 3500 and operator panel CT 342 "Touch Screen"
  • 5 lateral folds:
    • 1st         (A)       airblast between pinch-rolls
    • 2nd        (B)       airblast and reversing conveyor and/or knife
    • 3rd         (C)       airblast between pinch-rolls and/or knife
    • 4th         (D)       airblast between pinch-rolls
    • 5th         (E)       airblast between pinch-rolls and/or knife.
                                reversing conveyor can be added as an
                                option.
                                the knifes in lateral fold (C) and (E) can be used a
                                mechanical by-pass.
  • 5 crossfolds:
    • 1st                  airblast and/or knife betweenpinch-rolls, automatic
                             center-finding                                  
    • 2nd                 reversing conveyor                                  
    • 3rd                  reversing conveyor and/or knife                                 
    • 4th                  outside swingarm station                                  
    • 5th                  outside swingarm station                                  
    • ”6 x 9”            as option a special cross fold section can be added
                             to make the 6 x 9” fold (Pat.)

 

After lateral folding the linen is by a roll-off conveyor placed on the crossfold where the belts run parallel to the folded linen ensuring that the piece stays parallel.

This means that the measruing for the first crossfold is done like in a lateral folder. The first crossfold is placed out of center, in this way the machine remeasures the position of the linen before making the fold.

The speed of the roll-off conveyor is controlled via frequency inverters through the PLC.

Automatic card board insertion (optional)

1st and 2nd quality stackers (optional)

Quality sorting, up to 4 different

Typical combination

Free standing unit or connected to an automatic sewing system.

JENTEX_ENG.pdf (372.63 kb)